/* * Copyright 2023 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "CursorInputMapper.h" #include #include #include #include #include #include #include #include #include #include #include #include "InputMapperTest.h" #include "InputReaderBase.h" #include "InterfaceMocks.h" #include "NotifyArgs.h" #include "TestEventMatchers.h" #include "ui/Rotation.h" #define TAG "CursorInputMapper_test" namespace android { using testing::AllOf; using testing::Return; using testing::VariantWith; constexpr auto ACTION_DOWN = AMOTION_EVENT_ACTION_DOWN; constexpr auto ACTION_MOVE = AMOTION_EVENT_ACTION_MOVE; constexpr auto ACTION_UP = AMOTION_EVENT_ACTION_UP; constexpr auto BUTTON_PRESS = AMOTION_EVENT_ACTION_BUTTON_PRESS; constexpr auto BUTTON_RELEASE = AMOTION_EVENT_ACTION_BUTTON_RELEASE; constexpr auto HOVER_MOVE = AMOTION_EVENT_ACTION_HOVER_MOVE; constexpr auto INVALID_CURSOR_POSITION = AMOTION_EVENT_INVALID_CURSOR_POSITION; constexpr ui::LogicalDisplayId DISPLAY_ID = ui::LogicalDisplayId::DEFAULT; constexpr ui::LogicalDisplayId SECONDARY_DISPLAY_ID = ui::LogicalDisplayId{DISPLAY_ID.val() + 1}; constexpr int32_t DISPLAY_WIDTH = 480; constexpr int32_t DISPLAY_HEIGHT = 800; constexpr int32_t TRACKBALL_MOVEMENT_THRESHOLD = 6; namespace { DisplayViewport createPrimaryViewport(ui::Rotation orientation) { const bool isRotated = orientation == ui::Rotation::Rotation90 || orientation == ui::Rotation::Rotation270; DisplayViewport v; v.displayId = DISPLAY_ID; v.orientation = orientation; v.logicalRight = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; v.logicalBottom = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; v.physicalRight = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; v.physicalBottom = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; v.deviceWidth = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; v.deviceHeight = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; v.isActive = true; v.uniqueId = "local:1"; return v; } DisplayViewport createSecondaryViewport() { DisplayViewport v; v.displayId = SECONDARY_DISPLAY_ID; v.orientation = ui::Rotation::Rotation0; v.logicalRight = DISPLAY_HEIGHT; v.logicalBottom = DISPLAY_WIDTH; v.physicalRight = DISPLAY_HEIGHT; v.physicalBottom = DISPLAY_WIDTH; v.deviceWidth = DISPLAY_HEIGHT; v.deviceHeight = DISPLAY_WIDTH; v.isActive = true; v.uniqueId = "local:2"; v.type = ViewportType::EXTERNAL; return v; } /** * A fake InputDeviceContext that allows the associated viewport to be specified for the mapper. * * This is currently necessary because InputMapperUnitTest doesn't register the mappers it creates * with the InputDevice object, meaning that InputDevice::isIgnored becomes true, and the input * device doesn't set its associated viewport when it's configured. * * TODO(b/319217713): work out a way to avoid this fake. */ class ViewportFakingInputDeviceContext : public InputDeviceContext { public: ViewportFakingInputDeviceContext(InputDevice& device, int32_t eventHubId, std::optional viewport) : InputDeviceContext(device, eventHubId), mAssociatedViewport(viewport) {} ViewportFakingInputDeviceContext(InputDevice& device, int32_t eventHubId, ui::Rotation orientation) : ViewportFakingInputDeviceContext(device, eventHubId, createPrimaryViewport(orientation)) {} std::optional getAssociatedViewport() const override { return mAssociatedViewport; } void setViewport(const std::optional& viewport) { mAssociatedViewport = viewport; } private: std::optional mAssociatedViewport; }; } // namespace namespace input_flags = com::android::input::flags; /** * Unit tests for CursorInputMapper. * These classes are named 'CursorInputMapperUnitTest...' to avoid name collision with the existing * 'CursorInputMapperTest...' classes. If all of the CursorInputMapper tests are migrated here, the * name can be simplified to 'CursorInputMapperTest'. * * TODO(b/283812079): move the remaining CursorInputMapper tests here. The ones that are left all * depend on viewport association, for which we'll need to fake InputDeviceContext. */ class CursorInputMapperUnitTestBase : public InputMapperUnitTest { protected: void SetUp() override { SetUpWithBus(BUS_USB); } void SetUpWithBus(int bus) override { InputMapperUnitTest::SetUpWithBus(bus); // Current scan code state - all keys are UP by default setScanCodeState(KeyState::UP, {BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, BTN_BACK, BTN_SIDE, BTN_FORWARD, BTN_EXTRA, BTN_TASK}); EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL)) .WillRepeatedly(Return(false)); EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL)) .WillRepeatedly(Return(false)); mFakePolicy->setDefaultPointerDisplayId(DISPLAY_ID); mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); } void createMapper() { createDevice(); mMapper = createInputMapper(*mDeviceContext, mReaderConfiguration); } void setPointerCapture(bool enabled) { mReaderConfiguration.pointerCaptureRequest.window = enabled ? sp::make() : nullptr; mReaderConfiguration.pointerCaptureRequest.seq = 1; int32_t generation = mDevice->getGeneration(); std::list args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::POINTER_CAPTURE); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithDeviceId(DEVICE_ID), WithEventTime(ARBITRARY_TIME))))); // Check that generation also got bumped ASSERT_GT(mDevice->getGeneration(), generation); } void testMotionRotation(int32_t originalX, int32_t originalY, int32_t rotatedX, int32_t rotatedY) { std::list args; args += process(ARBITRARY_TIME, EV_REL, REL_X, originalX); args += process(ARBITRARY_TIME, EV_REL, REL_Y, originalY); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(ACTION_MOVE), WithCoords(float(rotatedX) / TRACKBALL_MOVEMENT_THRESHOLD, float(rotatedY) / TRACKBALL_MOVEMENT_THRESHOLD))))); } }; class CursorInputMapperUnitTest : public CursorInputMapperUnitTestBase { protected: void SetUp() override { input_flags::enable_new_mouse_pointer_ballistics(false); CursorInputMapperUnitTestBase::SetUp(); } }; TEST_F(CursorInputMapperUnitTest, GetSourcesReturnsMouseInPointerMode) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); ASSERT_EQ(AINPUT_SOURCE_MOUSE, mMapper->getSources()); } TEST_F(CursorInputMapperUnitTest, GetSourcesReturnsTrackballInNavigationMode) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); ASSERT_EQ(AINPUT_SOURCE_TRACKBALL, mMapper->getSources()); } /** * Move the mouse and then click the button. Check whether HOVER_EXIT is generated when hovering * ends. Currently, it is not. */ TEST_F(CursorInputMapperUnitTest, HoverAndLeftButtonPress) { createMapper(); std::list args; // Move the cursor a little args += process(EV_REL, REL_X, 10); args += process(EV_REL, REL_Y, 20); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(WithMotionAction(HOVER_MOVE)))); // Now click the mouse button args.clear(); args += process(EV_KEY, BTN_LEFT, 1); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(WithMotionAction(ACTION_DOWN)), VariantWith(WithMotionAction(BUTTON_PRESS)))); // Move some more. args.clear(); args += process(EV_REL, REL_X, 10); args += process(EV_REL, REL_Y, 20); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(WithMotionAction(ACTION_MOVE)))); // Release the button args.clear(); args += process(EV_KEY, BTN_LEFT, 0); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(WithMotionAction(BUTTON_RELEASE)), VariantWith(WithMotionAction(ACTION_UP)), VariantWith(WithMotionAction(HOVER_MOVE)))); } /** * Set pointer capture and check that ACTION_MOVE events are emitted from CursorInputMapper. * During pointer capture, source should be set to MOUSE_RELATIVE. When the capture is disabled, * the events should be generated normally: * 1) The source should return to SOURCE_MOUSE * 2) Cursor position should be incremented by the relative device movements * 3) Cursor position of NotifyMotionArgs should now be getting populated. * When it's not SOURCE_MOUSE, CursorInputMapper doesn't populate cursor position values. */ TEST_F(CursorInputMapperUnitTest, ProcessPointerCapture) { createMapper(); setPointerCapture(true); std::list args; // Move. args += process(EV_REL, REL_X, 10); args += process(EV_REL, REL_Y, 20); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(ACTION_MOVE), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(10.0f, 20.0f), WithRelativeMotion(10.0f, 20.0f), WithCursorPosition(INVALID_CURSOR_POSITION, INVALID_CURSOR_POSITION))))); // Button press. args.clear(); args += process(EV_KEY, BTN_MOUSE, 1); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(ACTION_DOWN), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(BUTTON_PRESS), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); // Button release. args.clear(); args += process(EV_KEY, BTN_MOUSE, 0); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(BUTTON_RELEASE), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(ACTION_UP), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); // Another move. args.clear(); args += process(EV_REL, REL_X, 30); args += process(EV_REL, REL_Y, 40); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(ACTION_MOVE), WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(30.0f, 40.0f), WithRelativeMotion(30.0f, 40.0f))))); // Disable pointer capture. Afterwards, events should be generated the usual way. setPointerCapture(false); const auto expectedCoords = WithCoords(0, 0); const auto expectedCursorPosition = WithCursorPosition(INVALID_CURSOR_POSITION, INVALID_CURSOR_POSITION); args.clear(); args += process(EV_REL, REL_X, 10); args += process(EV_REL, REL_Y, 20); args += process(EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), expectedCoords, expectedCursorPosition, WithRelativeMotion(10.0f, 20.0f))))); } TEST_F(CursorInputMapperUnitTest, PopulateDeviceInfoReturnsScaledRangeInNavigationMode) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); InputDeviceInfo info; mMapper->populateDeviceInfo(info); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_TRACKBALL, -1.0f, 1.0f, 0.0f, 1.0f / TRACKBALL_MOVEMENT_THRESHOLD)); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_TRACKBALL, -1.0f, 1.0f, 0.0f, 1.0f / TRACKBALL_MOVEMENT_THRESHOLD)); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_PRESSURE, AINPUT_SOURCE_TRACKBALL, 0.0f, 1.0f, 0.0f, 0.0f)); } TEST_F(CursorInputMapperUnitTest, ProcessShouldSetAllFieldsAndIncludeGlobalMetaState) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); EXPECT_CALL(mMockInputReaderContext, getGlobalMetaState()) .WillRepeatedly(Return(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON)); std::list args; // Button press. // Mostly testing non x/y behavior here so we don't need to check again elsewhere. args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithEventTime(ARBITRARY_TIME), WithDeviceId(DEVICE_ID), WithSource(AINPUT_SOURCE_TRACKBALL), WithFlags(0), WithEdgeFlags(0), WithPolicyFlags(0), WithMotionAction(AMOTION_EVENT_ACTION_DOWN), WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithPointerCount(1), WithPointerId(0, 0), WithToolType(ToolType::MOUSE), WithCoords(0.0f, 0.0f), WithPressure(1.0f), WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, TRACKBALL_MOVEMENT_THRESHOLD), WithDownTime(ARBITRARY_TIME))), VariantWith( AllOf(WithEventTime(ARBITRARY_TIME), WithDeviceId(DEVICE_ID), WithSource(AINPUT_SOURCE_TRACKBALL), WithFlags(0), WithEdgeFlags(0), WithPolicyFlags(0), WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithPointerCount(1), WithPointerId(0, 0), WithToolType(ToolType::MOUSE), WithCoords(0.0f, 0.0f), WithPressure(1.0f), WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, TRACKBALL_MOVEMENT_THRESHOLD), WithDownTime(ARBITRARY_TIME))))); args.clear(); // Button release. Should have same down time. args += process(ARBITRARY_TIME + 1, EV_KEY, BTN_MOUSE, 0); args += process(ARBITRARY_TIME + 1, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithEventTime(ARBITRARY_TIME + 1), WithDeviceId(DEVICE_ID), WithSource(AINPUT_SOURCE_TRACKBALL), WithFlags(0), WithEdgeFlags(0), WithPolicyFlags(0), WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), WithButtonState(0), WithPointerCount(1), WithPointerId(0, 0), WithToolType(ToolType::MOUSE), WithCoords(0.0f, 0.0f), WithPressure(0.0f), WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, TRACKBALL_MOVEMENT_THRESHOLD), WithDownTime(ARBITRARY_TIME))), VariantWith( AllOf(WithEventTime(ARBITRARY_TIME + 1), WithDeviceId(DEVICE_ID), WithSource(AINPUT_SOURCE_TRACKBALL), WithFlags(0), WithEdgeFlags(0), WithPolicyFlags(0), WithMotionAction(AMOTION_EVENT_ACTION_UP), WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), WithButtonState(0), WithPointerCount(1), WithPointerId(0, 0), WithToolType(ToolType::MOUSE), WithCoords(0.0f, 0.0f), WithPressure(0.0f), WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, TRACKBALL_MOVEMENT_THRESHOLD), WithDownTime(ARBITRARY_TIME))))); } TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleIndependentXYUpdates) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); std::list args; // Motion in X but not Y. args += process(ARBITRARY_TIME, EV_REL, REL_X, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_MOVE), WithCoords(1.0f / TRACKBALL_MOVEMENT_THRESHOLD, 0.0f), WithPressure(0.0f))))); args.clear(); // Motion in Y but not X. args += process(ARBITRARY_TIME, EV_REL, REL_Y, -2); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_MOVE), WithCoords(0.0f, -2.0f / TRACKBALL_MOVEMENT_THRESHOLD), WithPressure(0.0f))))); args.clear(); } TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleIndependentButtonUpdates) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); std::list args; // Button press. args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_DOWN), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); args.clear(); // Button release. args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_UP), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); } TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleCombinedXYAndButtonUpdates) { mPropertyMap.addProperty("cursor.mode", "navigation"); createMapper(); std::list args; // Combined X, Y and Button. args += process(ARBITRARY_TIME, EV_REL, REL_X, 1); args += process(ARBITRARY_TIME, EV_REL, REL_Y, -2); args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_DOWN), WithCoords(1.0f / TRACKBALL_MOVEMENT_THRESHOLD, -2.0f / TRACKBALL_MOVEMENT_THRESHOLD), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithCoords(1.0f / TRACKBALL_MOVEMENT_THRESHOLD, -2.0f / TRACKBALL_MOVEMENT_THRESHOLD), WithPressure(1.0f))))); args.clear(); // Move X, Y a bit while pressed. args += process(ARBITRARY_TIME, EV_REL, REL_X, 2); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_MOVE), WithCoords(2.0f / TRACKBALL_MOVEMENT_THRESHOLD, 1.0f / TRACKBALL_MOVEMENT_THRESHOLD), WithPressure(1.0f))))); args.clear(); // Release Button. args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_UP), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); args.clear(); } TEST_F(CursorInputMapperUnitTest, ProcessShouldNotRotateMotionsWhenOrientationAware) { // InputReader works in the un-rotated coordinate space, so orientation-aware devices do not // need to be rotated. mPropertyMap.addProperty("cursor.mode", "navigation"); mPropertyMap.addProperty("cursor.orientationAware", "1"); createDevice(); ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, ui::Rotation::Rotation90); mMapper = createInputMapper(deviceContext, mReaderConfiguration); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, 1, 0, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 1, 1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 0, 1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, -1, 1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, -1, 0, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, -1, -1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 0, -1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 1, -1, 1)); } TEST_F(CursorInputMapperUnitTest, ProcessShouldRotateMotionsWhenNotOrientationAware) { // Since InputReader works in the un-rotated coordinate space, only devices that are not // orientation-aware are affected by display rotation. mPropertyMap.addProperty("cursor.mode", "navigation"); createDevice(); ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, ui::Rotation::Rotation0); mMapper = createInputMapper(deviceContext, mReaderConfiguration); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, 1, 0, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 1, 1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 0, 1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, -1, 1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, -1, 0, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, -1, -1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 0, -1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 1, -1, 1)); deviceContext.setViewport(createPrimaryViewport(ui::Rotation::Rotation90)); std::list args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::DISPLAY_INFO); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, 1, -1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 1, -1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 0, 0, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, -1, 1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, -1, 1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, -1, 1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 0, 0, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 1, -1, -1)); deviceContext.setViewport(createPrimaryViewport(ui::Rotation::Rotation180)); args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::DISPLAY_INFO); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, 1, 0, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 1, -1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 0, -1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, -1, -1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, -1, 0, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, -1, 1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 0, 1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 1, 1, -1)); deviceContext.setViewport(createPrimaryViewport(ui::Rotation::Rotation270)); args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::DISPLAY_INFO); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, 1, 1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 1, 1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, 0, 0, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 1, -1, -1, -1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation( 0, -1, -1, 0)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, -1, -1, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 0, 0, 1)); ASSERT_NO_FATAL_FAILURE(testMotionRotation(-1, 1, 1, 1)); } TEST_F(CursorInputMapperUnitTest, PopulateDeviceInfoReturnsRangeFromPolicy) { mPropertyMap.addProperty("cursor.mode", "pointer"); mFakePolicy->clearViewports(); createMapper(); InputDeviceInfo info; mMapper->populateDeviceInfo(info); // Initially there should not be a valid motion range because there's no viewport or pointer // bounds. ASSERT_EQ(nullptr, info.getMotionRange(AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_MOUSE)); ASSERT_EQ(nullptr, info.getMotionRange(AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_MOUSE)); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_PRESSURE, AINPUT_SOURCE_MOUSE, 0.0f, 1.0f, 0.0f, 0.0f)); // When the viewport and the default pointer display ID is set, then there should be a valid // motion range. mFakePolicy->setDefaultPointerDisplayId(DISPLAY_ID); mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); std::list args = mMapper->reconfigure(systemTime(), mReaderConfiguration, InputReaderConfiguration::Change::DISPLAY_INFO); ASSERT_THAT(args, testing::IsEmpty()); InputDeviceInfo info2; mMapper->populateDeviceInfo(info2); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_MOUSE, 0, DISPLAY_WIDTH - 1, 0.0f, 0.0f)); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_MOUSE, 0, DISPLAY_HEIGHT - 1, 0.0f, 0.0f)); ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_PRESSURE, AINPUT_SOURCE_MOUSE, 0.0f, 1.0f, 0.0f, 0.0f)); } TEST_F(CursorInputMapperUnitTest, ConfigureDisplayIdWithAssociatedViewport) { DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation90); DisplayViewport secondaryViewport = createSecondaryViewport(); mReaderConfiguration.setDisplayViewports({primaryViewport, secondaryViewport}); // Set up the secondary display as the display on which the pointer should be shown. // The InputDevice is not associated with any display. createDevice(); ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, secondaryViewport); mMapper = createInputMapper(deviceContext, mReaderConfiguration); std::list args; // Ensure input events are generated for the secondary display. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), WithDisplayId(SECONDARY_DISPLAY_ID), WithCoords(0.0f, 0.0f))))); } TEST_F(CursorInputMapperUnitTest, ConfigureDisplayIdShouldGenerateEventForMismatchedPointerDisplay) { DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation90); DisplayViewport secondaryViewport = createSecondaryViewport(); mReaderConfiguration.setDisplayViewports({primaryViewport, secondaryViewport}); // Set up the primary display as the display on which the pointer should be shown. createDevice(); // Associate the InputDevice with the secondary display. ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, secondaryViewport); mMapper = createInputMapper(deviceContext, mReaderConfiguration); // With PointerChoreographer enabled, there could be a PointerController for the associated // display even if it is different from the pointer display. So the mapper should generate an // event. std::list args; args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), WithDisplayId(SECONDARY_DISPLAY_ID), WithCoords(0.0f, 0.0f))))); } TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleAllButtonsWithZeroCoords) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list args; // press BTN_LEFT, release BTN_LEFT args += process(ARBITRARY_TIME, EV_KEY, BTN_LEFT, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_DOWN), WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); args.clear(); args += process(ARBITRARY_TIME, EV_KEY, BTN_LEFT, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_UP), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); args.clear(); // press BTN_RIGHT + BTN_MIDDLE, release BTN_RIGHT, release BTN_MIDDLE args += process(ARBITRARY_TIME, EV_KEY, BTN_RIGHT, 1); args += process(ARBITRARY_TIME, EV_KEY, BTN_MIDDLE, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_DOWN), WithButtonState(AMOTION_EVENT_BUTTON_SECONDARY | AMOTION_EVENT_BUTTON_TERTIARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithButtonState(AMOTION_EVENT_BUTTON_TERTIARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithButtonState(AMOTION_EVENT_BUTTON_SECONDARY | AMOTION_EVENT_BUTTON_TERTIARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); args.clear(); args += process(ARBITRARY_TIME, EV_KEY, BTN_RIGHT, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithButtonState(AMOTION_EVENT_BUTTON_TERTIARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_MOVE), WithButtonState(AMOTION_EVENT_BUTTON_TERTIARY), WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); args.clear(); args += process(ARBITRARY_TIME, EV_KEY, BTN_MIDDLE, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithButtonState(0), WithMotionAction(AMOTION_EVENT_ACTION_UP), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithButtonState(0), WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); } class CursorInputMapperButtonKeyTest : public CursorInputMapperUnitTest, public testing::WithParamInterface< std::tuple> {}; TEST_P(CursorInputMapperButtonKeyTest, ProcessShouldHandleButtonKeyWithZeroCoords) { auto [evdevCode, expectedButtonState, expectedKeyCode] = GetParam(); mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list args; args += process(ARBITRARY_TIME, EV_KEY, evdevCode, 1); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith(AllOf(WithKeyAction(AKEY_EVENT_ACTION_DOWN), WithKeyCode(expectedKeyCode))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithButtonState(expectedButtonState), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_PRESS), WithButtonState(expectedButtonState), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); args.clear(); args += process(ARBITRARY_TIME, EV_KEY, evdevCode, 0); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_BUTTON_RELEASE), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))), VariantWith(AllOf(WithKeyAction(AKEY_EVENT_ACTION_UP), WithKeyCode(expectedKeyCode))))); } INSTANTIATE_TEST_SUITE_P( SideExtraBackAndForward, CursorInputMapperButtonKeyTest, testing::Values(std::make_tuple(BTN_SIDE, AMOTION_EVENT_BUTTON_BACK, AKEYCODE_BACK), std::make_tuple(BTN_EXTRA, AMOTION_EVENT_BUTTON_FORWARD, AKEYCODE_FORWARD), std::make_tuple(BTN_BACK, AMOTION_EVENT_BUTTON_BACK, AKEYCODE_BACK), std::make_tuple(BTN_FORWARD, AMOTION_EVENT_BUTTON_FORWARD, AKEYCODE_FORWARD))); TEST_F(CursorInputMapperUnitTest, ProcessWhenModeIsPointerShouldKeepZeroCoords) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list args; args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithSource(AINPUT_SOURCE_MOUSE), WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithCoords(0.0f, 0.0f), WithPressure(0.0f), WithSize(0.0f), WithTouchDimensions(0.0f, 0.0f), WithToolDimensions(0.0f, 0.0f), WithOrientation(0.0f), WithDistance(0.0f))))); } /** * When Pointer Capture is enabled, we expect to report unprocessed relative movements, so any * pointer acceleration or speed processing should not be applied. */ TEST_F(CursorInputMapperUnitTest, PointerCaptureDisablesVelocityProcessing) { mPropertyMap.addProperty("cursor.mode", "pointer"); const VelocityControlParameters testParams(/*scale=*/5.f, /*lowThreshold=*/0.f, /*highThreshold=*/100.f, /*acceleration=*/10.f); mReaderConfiguration.pointerVelocityControlParameters = testParams; mFakePolicy->setVelocityControlParams(testParams); createMapper(); NotifyMotionArgs motionArgs; std::list args; // Move and verify scale is applied. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithSource(AINPUT_SOURCE_MOUSE), WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE))))); motionArgs = std::get(args.front()); const float relX = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X); const float relY = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y); ASSERT_GT(relX, 10); ASSERT_GT(relY, 20); args.clear(); // Enable Pointer Capture setPointerCapture(true); // Move and verify scale is not applied. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithMotionAction(AMOTION_EVENT_ACTION_MOVE))))); motionArgs = std::get(args.front()); const float relX2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X); const float relY2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y); ASSERT_EQ(10, relX2); ASSERT_EQ(20, relY2); } TEST_F(CursorInputMapperUnitTest, ConfigureDisplayIdNoAssociatedViewport) { // Set up the default display. mFakePolicy->clearViewports(); mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); // Set up the secondary display as the display on which the pointer should be shown. // The InputDevice is not associated with any display. mFakePolicy->addDisplayViewport(createSecondaryViewport()); mFakePolicy->setDefaultPointerDisplayId(SECONDARY_DISPLAY_ID); createMapper(); // Ensure input events are generated without display ID or coords, because they will be decided // later by PointerChoreographer. std::list args; args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), WithDisplayId(ui::LogicalDisplayId::INVALID), WithCoords(0.0f, 0.0f))))); } // TODO(b/320433834): De-duplicate the test cases once the flag is removed. class CursorInputMapperUnitTestWithNewBallistics : public CursorInputMapperUnitTestBase { protected: void SetUp() override { input_flags::enable_new_mouse_pointer_ballistics(true); CursorInputMapperUnitTestBase::SetUp(); } }; TEST_F(CursorInputMapperUnitTestWithNewBallistics, PointerCaptureDisablesVelocityProcessing) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); NotifyMotionArgs motionArgs; std::list args; // Move and verify scale is applied. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); motionArgs = std::get(args.front()); const float relX = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X); const float relY = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y); ASSERT_GT(relX, 10); ASSERT_GT(relY, 20); args.clear(); // Enable Pointer Capture setPointerCapture(true); // Move and verify scale is not applied. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); motionArgs = std::get(args.front()); const float relX2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X); const float relY2 = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y); ASSERT_EQ(10, relX2); ASSERT_EQ(20, relY2); } TEST_F(CursorInputMapperUnitTestWithNewBallistics, ConfigureAccelerationWithAssociatedViewport) { mPropertyMap.addProperty("cursor.mode", "pointer"); DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation0); mReaderConfiguration.setDisplayViewports({primaryViewport}); createDevice(); ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, primaryViewport); mMapper = createInputMapper(deviceContext, mReaderConfiguration); std::list args; // Verify that acceleration is being applied by default by checking that the movement is scaled. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(HOVER_MOVE), WithDisplayId(DISPLAY_ID))))); const auto& coords = get(args.back()).pointerCoords[0]; ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), 10.f); ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y), 20.f); // Disable acceleration for the display, and verify that acceleration is no longer applied. mReaderConfiguration.displaysWithMousePointerAccelerationDisabled.emplace(DISPLAY_ID); args += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::POINTER_SPEED); args.clear(); args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(AllOf(WithMotionAction(HOVER_MOVE), WithDisplayId(DISPLAY_ID), WithRelativeMotion(10, 20))))); } TEST_F(CursorInputMapperUnitTestWithNewBallistics, ConfigureAccelerationOnDisplayChange) { mPropertyMap.addProperty("cursor.mode", "pointer"); DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation0); mReaderConfiguration.setDisplayViewports({primaryViewport}); // Disable acceleration for the display. mReaderConfiguration.displaysWithMousePointerAccelerationDisabled.emplace(DISPLAY_ID); createDevice(); // Don't associate the device with the display yet. ViewportFakingInputDeviceContext deviceContext(*mDevice, EVENTHUB_ID, /*viewport=*/std::nullopt); mMapper = createInputMapper(deviceContext, mReaderConfiguration); std::list args; // Verify that acceleration is being applied by default by checking that the movement is scaled. args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith(WithMotionAction(HOVER_MOVE)))); const auto& coords = get(args.back()).pointerCoords[0]; ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), 10.f); ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y), 20.f); // Now associate the device with the display, and verify that acceleration is disabled. deviceContext.setViewport(primaryViewport); args += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, InputReaderConfiguration::Change::DISPLAY_INFO); args.clear(); args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); ASSERT_THAT(args, ElementsAre(VariantWith( AllOf(WithMotionAction(HOVER_MOVE), WithDisplayId(DISPLAY_ID), WithRelativeMotion(10, 20))))); } namespace { // Minimum timestamp separation between subsequent input events from a Bluetooth device. constexpr nsecs_t MIN_BLUETOOTH_TIMESTAMP_DELTA = ms2ns(4); // Maximum smoothing time delta so that we don't generate events too far into the future. constexpr nsecs_t MAX_BLUETOOTH_SMOOTHING_DELTA = ms2ns(32); } // namespace // --- BluetoothCursorInputMapperUnitTest --- class BluetoothCursorInputMapperUnitTest : public CursorInputMapperUnitTestBase { protected: void SetUp() override { SetUpWithBus(BUS_BLUETOOTH); } }; TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmoothening) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list argsList; nsecs_t kernelEventTime = ARBITRARY_TIME; nsecs_t expectedEventTime = ARBITRARY_TIME; argsList += process(kernelEventTime, EV_REL, REL_X, 1); argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); // Process several events that come in quick succession, according to their timestamps. for (int i = 0; i < 3; i++) { constexpr static nsecs_t delta = ms2ns(1); static_assert(delta < MIN_BLUETOOTH_TIMESTAMP_DELTA); kernelEventTime += delta; expectedEventTime += MIN_BLUETOOTH_TIMESTAMP_DELTA; argsList += process(kernelEventTime, EV_REL, REL_X, 1); argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); } } TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmootheningIsCapped) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list argsList; nsecs_t expectedEventTime = ARBITRARY_TIME; argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); // Process several events with the same timestamp from the kernel. // Ensure that we do not generate events too far into the future. constexpr static int32_t numEvents = MAX_BLUETOOTH_SMOOTHING_DELTA / MIN_BLUETOOTH_TIMESTAMP_DELTA; for (int i = 0; i < numEvents; i++) { expectedEventTime += MIN_BLUETOOTH_TIMESTAMP_DELTA; argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); } // By processing more events with the same timestamp, we should not generate events with a // timestamp that is more than the specified max time delta from the timestamp at its injection. const nsecs_t cappedEventTime = ARBITRARY_TIME + MAX_BLUETOOTH_SMOOTHING_DELTA; for (int i = 0; i < 3; i++) { argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(cappedEventTime))))); argsList.clear(); } } TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmootheningNotUsed) { mPropertyMap.addProperty("cursor.mode", "pointer"); createMapper(); std::list argsList; nsecs_t kernelEventTime = ARBITRARY_TIME; nsecs_t expectedEventTime = ARBITRARY_TIME; argsList += process(kernelEventTime, EV_REL, REL_X, 1); argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); // If the next event has a timestamp that is sufficiently spaced out so that Bluetooth timestamp // smoothening is not needed, its timestamp is not affected. kernelEventTime += MAX_BLUETOOTH_SMOOTHING_DELTA + ms2ns(1); expectedEventTime = kernelEventTime; argsList += process(kernelEventTime, EV_REL, REL_X, 1); argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); EXPECT_THAT(argsList, ElementsAre(VariantWith( AllOf(WithMotionAction(AMOTION_EVENT_ACTION_HOVER_MOVE), WithEventTime(expectedEventTime))))); argsList.clear(); } } // namespace android